The problem of choosing the most optimal gas supply scheme for rural settlements is considered, taking into account technical and economic criteria. For example x. Knyazhensky-1, Mikhailovsky district of the Volgograd region, several gas supply schemes are proposed. The feasibility study of the choice of one of the possible options is given. It was found that for rural settlements with an extended form, the most optimal is a scheme with two sources of gas supply and a reserving jumper between them.

Keywords: gas distribution network, gas reduction points, hydraulic regime, normalized pressure, cost, construction and installation works

The article presents the results of studies on the influence of sintering modes on the distribution of carbon in the material of a porous powder billet used for the manufacture of a differential satellite by dynamic hot pressing. The distribution of carbon and density in the satellite material is established, recommendations for its chemical and thermal treatment are given.

Keywords: dynamic hot pressing, heating temperature, powder billet, density, satellite, sintering temperature, cementation, quenching, material property

The problem of removal of combustion products during the reconstruction of existing boiler houses is considered. The issue of determining pressure losses due to friction in steel and brick gas ducts when performing an aerodynamic calculation of gas ducts from gas-fired boilers is considered. Nomograms have been developed that make it possible to determine the specific pressure loss depending on the volume of flue gases and the diameter of the gas ducts.

Keywords: reconstruction, boiler units, aerodynamic calculation, friction pressure losses, gas ducts

The problems of modern monolithic construction, namely errors in the installation of sound insulation in monolithic construction, require special attention, since the increased level of noise and vibrations during the operation of premises affects the psychophysical state of a person. Modern enclosing structures are often used in standard solutions without the necessary additional sound insulation. Therefore, in order to develop and introduce effective measures to prevent existing defects in the premises, this paper lists the main factors affecting the high level of permissible noise in the premises. The practice of applied methods and solutions used to improve the sound insulation of individual structures is given. The technology of performing works on the device of sound and noise insulation in residential premises, with an indication of the maximum permissible noise level, is considered.

Keywords: sound insulation, shock noise, residential buildings, noise insulation, air noise, monolithic house, comfortable environment, noise, construction, materials

This article discusses the advantages and perspective for the use of biogas in the conditions of the Republic of Crimea. The ecological and economic aspects of the use of biogas technologies at winemaking enterprises are touched upon. Describes the methods of using biogas at the winery "Massandra" in the Republic of Crimea. The calculation of the use of natural gas in the boiler house of a winery is made. A calculation was made for the use of biogas in a boiler house. It can be concluded that when using biogas in the boiler house of a winery, fuel needs are fully covered. The surplus of the remaining fuel is proposed to be used in a cogeneration plant to generate electricity.

Keywords: biogas, cogeneration plant, grape plant residue, recycling, interchangeability, granulate, natural gas, grapes, thermal energy, electricity, winery

The increased fire hazard of foamed polymers hinders their widespread use in the construction industry. An effective method of reducing the combustibility of carbonizing polymers is the use of phosphorus-containing flame retardants. Therefore, investigation of the influence of phosphorus-containing flame retardants to the composition of pyrolysis products and operational properties – heat resistance, flammability, combustibility and smoke generating ability – is the important objective. In the article we have presented the results of related experimental studies. The effects of phosphorus-containing flame retardants on heat resistance and main operational properties related to fire-safety of foamed constructional polymers are examined. A correlation was found between the results of evaluating the combustibility of foams by the limiting oxygen index and the combustibility index. Optimal concentrations of phosphorus in the foamed thermosetting polymers are established. It was shown that optimal concentration of the flame retardants leads to low combustibility of polyurethane-, resole- and urea-based foamed polymers.

Keywords: foamed polymers, fire hazard, оптимальное сдержаниеreducing the combustibility, phosphorus-containing flame retardants, heat resistance, flammability, combustibility and smoke generating ability

This article presents one of the methods for analyzing the chirality coefficient of a medium depending on such parameters as concentration n, frequency f, dielectric constants of both the container material, the medium itself, and left- and right-handed spirals distributed in this material. As a result of this work, the frequency characteristics of the chirality coefficient were obtained at various concentrations of the container trace elements.

Keywords: chiral medium, Telledzhene element, chirality coefficient, dielectric constant of the medium, magnetic permeability of the medium, spiral structure, metamaterial substrate, bulk concentration, metamaterial, spiral inclusions

When developing the final qualifying paper the problem of choosing the optimal structural concept for bearing and enclosing structures. To solve it, normative technical and economic indicators, variant comparison (trial design) and other methods can be used. The objective of the present study, which is carried out as part of the final qualifying paper, is to search for and develop an algorithm that is understandable for practical use for choosing an effective (in terms of specific consumption) structural concept for a steel truss.

Keywords: optimization, specific consumption, cost value, steel truss, steel structure design, STARK ES, analysis of trusses, optimal structural concept, changing the section type, selection of an effective structural concept

This article is devoted to the study of concentrations of carbon monoxide (II), phenol, formaldehyde, aliphatic hydrocarbons in the premises of buildings, including the assessment of the regularities of their vertical distribution in the height of buildings at different times of the day from vehicles. Research is necessary to develop a program for electronic computers, which is necessary for the design of construction projects.

Keywords: помещения, оксид углерода (II), фенол, формальдегид, углеводороды алифатические, здания, время суток

An analysis of the accident rate on gas pipelines is given. Mathematical dependences of the volume of gas entering the atmosphere during the degassing of a gas pipeline section are given. Based on the existing nomogram for determining the gas compressibility factor for main gas pipelines, a nomogram for natural gas transported through gas distribution networks was constructed.

Keywords: gas pipelines, accident rate, degassing, gas bleeding, gas compressibility factor

The article analyzes the impact of the transition to distance learning on the academic performance of students of the Institute of Computer Science, Electronics and Robotics. The disciplines are identified, the development of which does not cause difficulties in the remote format and disciplines to which such technologies are difficult to apply. Based on the findings, recommendations are given to improve the quality of education at the Institute.

Keywords: quality, distance technologies, academic performance, control card, alternative attribute

the article analyzes the economic instruments used by states in domestic and foreign policy from the point of view of identifying the existing coercive mechanisms in modern social practices. The study revealed how states use economic instruments as the preferred means of geopolitical struggle. In addition, the work separately reflects the fact that States should preserve the right to an original socio-economic model of development. We should also not forget about the negative consequences of unilateral coercive measures. Using the method of cognitive modeling and constructing cognitive maps, the authors identify the connections in the analyzed social practices from the perspective of studying the means of geo-economic pressure.

Keywords: cyberwarfare, cyberattacks, cybersecurity risks, communication networks, transport systems, tactical, operational and strategic initiatives

The results of the automated evaluation of the dynamic quality of grinding machines in the process monitoring system are presented. The transfer function of the dynamic system is analytically obtained, a formula for the frequency function is derived from it, on the basis of which models of vibration spectra are constructed, in which frequencies are present that are adequate to the real vibro-acoustic vibrations of the dynamic system of the machine when processing rings. For experimental evaluation of the dynamic quality of machine tools, integral estimates of the low-frequency components of the vibration spectrum are used, characterizing the relationship between the quality of processing bearing rings and the dynamic quality of machine tools.

Keywords: dynamic quality of the grinding machine, vibroacoustic vibrations, bearing rings, processing quality, monitoring system

Refrigerating machines are designed to cover peak heat generation in public buildings. At the same time, peak loads are often short-term and most of the time the refrigerating machines operate at 40-60% of their maximum capacity. The article deals with the issues of uneven cold consumption on the example of a sports complex located in Volgograd. When designing the air conditioning system of the games hall, a cooling system with the use of "chiller-fan coils"is used. An effective solution to reduce costs is to include a cold storage battery in the cooling station circuit. The use of a cold storage battery allows you to reduce operating costs.

Keywords: cooling system, air conditioning system, refrigeration machine, cold storage, energy consumption, peak loads, variable energy consumption

At present, despite the variety of mini-loaders in terms of purpose and type of work performed, the problems associated with the technology of snow removal from roads and adjacent areas remain relevant. Along with the continuous growth of the municipal machinery fleet, qualitative changes are constantly being made to its working equipment, aimed at increasing the productivity and efficiency of the snow removal process through the introduction of new rational and technical solutions.

Keywords: mini-loader, blade, snow removal, working equipment, snow cover, compaction, hydraulic cylinders, shock absorbers