The article presents the results of the calculation of a high-rise building, the load-bearing frame of which uses wooden structures. With a significant height of the structure, wind load begins to have a significant impact on the deformability of the frame. A calculation scheme is proposed, in which two options for applying wind pressure are considered - on columns and in floor beams.

Keywords: high-rise building, permanent loads, short-term loads, instantaneous loads, modulus of elasticity, stiffness, stress, displacement, CAD

The new socio-economic and political conditions of the North Bulgarian Renaissance (1762-1878) determined the way of life, the nature of relationships in society, and its material environment. The object of their influence was primarily residential development, which revealed a variety of architectural forms. Their volumetric and planning features are determined by new ideological and artistic views. At the same time, unity is revealed in architectural diversity, predetermined by local natural and climatic conditions, sustainable construction technologies, and the revival of ancient spiritual and historical and cultural traditions. This article analyzes the development of techniques for the architectural organization of a residential building in the context of settlement and chronology.

Keywords: Bulgarian Renaissance, natural conditions, socio-economic factors, historical background, natural landscape, space-planning schemes, residential architecture

The article examines the epoch-making buildings of the city of Nalchik, which include the educational campus (LUG) and Stalin's dacha. The work provides historical information on these objects, architectural, artistic and planning solutions, their significance for the city. The main purpose of epoch-making buildings, according to the authors, is to preserve these objects for citizens and residents of the republic, as the historical and cultural heritage of the people, which must be recreated for future generations and preserve the recognizable unique image of the city.

Keywords: architecture, epoch-making buildings, facade, plan, building, school, Stalin's Dacha, Dacha N5, bay window, gazebo, brick, brick-wooden house

Reinforced concrete flat slabs continue to be one of the most popular floor systems due to the speed of construction and their inherent flexibility in the layout of the premises. However, flat, non-rigid floors are subject to brittle fracture at the junction of the slab and column, which can spread and lead to the progressive collapse of a larger segment of the structural system. The lack of shear strength in two directions may be due to design errors, insufficient strength of the material, or overload.

Keywords: reinforced concrete slab, punching, transverse reinforcement, fiberglass, carbon fiber

The article considers the problem of sediment formation, sludge and corrosion on the heat transfer surface during the operation of heat exchange equipment at housing and communal services facilities. A new method of non-selective mechanical cleaning using a water hammer is proposed. The description and principle of operation of this cleaning system at the central heating station of the Ogarev Moscow State University are given. To confirm the effectiveness of the proposed technical solution, the results of thermal and hydraulic tests are presented.

Keywords: deposits, sludge, corrosion, cleaning, heat exchanger, water hammer, heat transfer

The construction industry is undergoing regular changes these days, influenced by many different factors. Large and structurally complex construction projects reveal more and more imperfections in traditional construction methods, e.g. increased time or production costs, downtime, delays, etc. Lean construction and its principles have emerged in search of solutions to problems in construction. In the search for solutions to problems in construction, the term - lean construction and its principles appeared, which replaced traditional methods and aimed at finding new approaches in the implementation of construction activities. In this scientific article the definition of Lean Construction is given, and also the history of Lean Construction and its chronology are considered. The comparison of the traditional construction model and Lean model is given, and also the connection of Building Information Modeling (BIM) with Lean Construction principles is analysed and an example of this connection is given.

Keywords: lean manufacturing, lean construction, construction, lean construction principles, lean technology, lean model, lean philosophy, life cycle of an object, information modelling technologies, engineering

The article presents a way to increase the load-bearing capacity of a reinforced concrete column due to metal clips from the corners with an increase in the load on it. To ensure the joint operation of the existing column and the metal cage, the corners are subjected to prestressing, which is achieved by compressing the corners with jacks.

Keywords: reinforced concrete column, column reinforcement, metal cage, prestressing of the cage

The practical significance associated with the development of automated software systems for calculating joints of steel structures of buildings and structures is noted. Using the IDEA Statica software package as an example, the calculation and analysis of the operation of a steel unit connecting the lower chord of a truss to a column was carried out. The order and sequence of entering the initial data for calculating the connection is shown. The calculation results present in tabular and graphical forms the equivalent stresses and plastic deformations of the main elements, as well as the results of inspections of bolted and welded connections of these elements to each other. A comparative analysis of numerical and analytical calculations was performed. Conclusions are formulated based on the results presented in the article.

Keywords: calculation model, connections, steel structures, component finite element method, design, nonlinear analysis, work analysis, stress, plastic deformation, bolted connection, welded connection

The main means of seismic protection for increasing the seismic resistance of buildings and structures are described. The main problems associated with the design of special seismic protection equipment are outlined. The basic requirements for the design and calculations of steel frame frames taking into account seismic impact in accordance with the current design standards in the Russian Federation are analyzed. There is an insufficient description of the requirements specified in the standards for performing calculations and design of structures and their connections. Recommendations and instructions are given for taking into account the requirements of the standards for the design of steel frame frames. Schematic diagrams of special units for coupling columns with crossbars, necessary for design in seismically hazardous areas, are presented. Conclusions are formulated.

Keywords: special units, columns, beams, seismic impact, seismic protection, steel frames, plastic hinges, excess strength factor, forces, plastic moment, design.

The effect of organomodified silica particles on the extraction of dissolved diesel fuel from water was studied. The dependence of the efficiency of water purification on the concentration and type of solid particles, as well as the concentration and type of surfactant, is shown. When using a short-chain surfactant to modify the surface of silica particles, the minimum residual concentration of diesel fuel was 2.71 mg/l at a concentration of 4% Aerosil-380 and hexylamine 57 mmol/l. Replacing the short-chain surfactant hexylamine with the long-chain CTAMB led to an 8% improvement in the quality of water purification due to an increase in the surface activity of the organic cation. The use of modified clay particles to purify water from diesel fuel showed lower efficiency compared to Aerosil-380 particles at similar concentrations of the solid phase and surfactant modifier.

Keywords: Pickering foam, foam emulsion, diesel fuel, water purification, silica, cationic surfactant, hexylamine, cetyltrimethylammonium bromide

The paper presents a solution to the problem of accelerating the process of visualizing the results of numerical simulation. The volumes of such data can be very large and the development of tools to speed up the process of analyzing modeling results is an urgent task. This article proposes a solution to the problem based on the development of a set of programs that automate the process of processing large-volume scientific data of the same type to create high-quality visualizations of the results of numerical modeling. The results are presented using the example of solving problems in astrophysics, but the proposed methodology can be quite easily applied to other subject areas in which models based on the dynamics of particle systems are used. The research described in the work is devoted to solving issues related to converting data obtained from numerical modeling into a format that can be read by the ParaView softwart, which implements many methods that allow obtaining very high-quality visualization. The work also describes the process of automating batch processing of a large amount of data that has the same structure, presents the results of an analysis of the acceleration of the visualization process when using the NVIDIA IndeX plug-in, and considers the possibility of improving the quality of visualization results when applying Delaunay triangulation to the original data.

Keywords: data visualization, Delaunay triangulation, rendering acceleration, ParaView, NVIDIA IndeX, VTK

The article discusses proposals for improving the use of discharge-pulse technology in the construction of boron-injection piles and camouflage widenings of bored piles with diameters of more than 300 mm. The application of voltages on the electrode system of a pulse current generator from 10 to 50 kV and an electric capacity of about 300 UF is considered. It has been found that in the case of using a relatively low voltage on the electrodes and an increase in the electrical capacity of the capacitor bank, the duration of the shock wave pressure on the ground increases several times. This contributes to a more intensive penetration of the liquid hardening material into the intergranular space of the near-well soil massif. It is proposed to use solutions using slag-alkali binders as a hardening material in the formation of boron-injection piles. Such solutions have greater fluidity compared to cement solutions and, when hardened, form a stone with greater strength and density. The article presents data from experimental studies confirming the increased strength (R = 130 MPa) and frost resistance of a solution prepared on slag-alkali binders, as well as data on determining their corrosion resistance to various aggressive media contained in groundwater. The possibility of stable breakdown of the interelectrode gap in aqueous solutions of slag-alkali media of various consistencies has been established, optimal energy parameters of the discharge have been determined for maximum effect of fixing the soils of the foundations.

Keywords: foundations, drilling piles, discharge-pulse technology, slag-alkali binders

This article discusses the results of studies of the behavior of reinforced concrete slabs during punching. The parameters affecting the shear strength of the joints of columns and slabs are considered. Studies of the influence of the strength of concrete, the location of reinforcement, the reinforcement coefficient, the shape and size of the column are given. Various types of reinforcement of reinforced concrete slabs in the punching zone are presented.

Keywords: floor slab, column, punching, shear, bending, transverse reinforcement, dowel action

This article examines models of arithmetic devices for finite ring neural networks of the second and third orders. The arithmetic devices under study were synthesized on the basis of FPGA. Estimates of hardware costs and performance of computers for system modules of residual classes of different capacity were obtained. The structure of a finite ring neural network with dynamic connections is proposed, the efficiency of which in terms of hardware costs is observed with increasing capacity of the residue number system module. The advantage of a finite ring neural network with dynamic connections is established for modules with a capacity of 64 bits and higher.

Keywords: neural networks, residue number system, group of elliptic curve points, FPGA, multiplier, adder

The production of nitrogen from air using membrane gas separation processes is widely used in many industries. The problem of controlling the gas separation process is associated with multi-loop control using control of several variables. To build a model of a gas separator, a detailed analysis of the gas separation process was carried out in this work. This article proposes a fuzzy logic controller used to match pressure fluctuations and air flow of a gas separator. The performance of the proposed controller was evaluated in comparison with traditional controllers. The proposed fuzzy logic controller makes it possible to increase the accuracy of the gas separation control system and reduce the duration of transient processes.

Keywords: fuzzy logic, controller, gas separation, membrane technology, nitrogen, control system